Nuts
Regular
Finished Hex Nuts:
Finished
hex nuts are the most common type of nut. Finished
refers to the dimensional standard. Except for
some smaller sizes, the width across the flats
of the hex is one-and-a-half times the nominal
diameter. Thickness of finished hex nuts is
approximately 90% of the the nominal diameter.
In
modern terminology these parts are usually referred
to as simply hex nuts, the finished being dropped.
However, as we at Nickel Systems are old-timers
in the fastener business, we still refer to these
parts as finished hex nuts.
Nickel
Systems maintains an inventory of hex nuts in
Hastelloy® (Alloys C276, C22, B2), Alloy 20
(Carpenter 20), Inconel® 600 (Alloy 600),
AL6XN®, Duplex 2205, Nitronic 60® (A194
8S - Finished Pattern), 317L Stainless, 18-8 Stainless,
and 316 Stainless in stock at all times. Other
alloys currently maintained hex nut inventory
include: Nickel 200, 330 Stainless, Hastelloy®
B3, and 904L.
|
